Lancom Systems LS61465 Informações Técnicas

110533/0809LANCOM Systems GmbHAdenauerstr. 20/B252146 WürselenGermanyE-Mail: [email protected] www.lancom.euLANCOM ES-2126+LANCOM ES-2126P...conn

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 1: Introduction9EN1IntroductionThe LANCOM switch models LANCOM ES-2126+ and LANCOM ES-2126P aremanaged la

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management99EN쮿 AuthenticationThe device for configuration can be accessed via

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management100EN쮿 Authorization왏 State: Activates authorization via TACACS+ ser

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management101EN왏 QoS왏 Reboot왏 Security왏 SNMP왏 STP왏 System왏 TACACS+왏 TFTP왏 Time

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management102EN쮿 Accounting 왏 State: Activates accounting via TACACS+ server.

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management103EN왏 LACP: LACP Disabled, LACP Enabled, LACP Member Added, LACP Po

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management104EN왏 Email:Mail Server: the IP address of the server transferring

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management105ENFunction name: 쮿 Function name: Isolated Group쮿 Function Descri

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management106EN쮿 Function Description: The function of the Restricted Group ca

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management107EN쮿 Function Description: Ingress Bandwidth Setting function is u

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management108EN쮿 Function Description: Egress Bandwidth Setting function is us

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 1: Introduction10EN1.1 Key Features in the Device쮿 QoS:Support Quality of Service by the IEEE 802.1P stan

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management109EN쮿 Parameter Description:왏 Storm Type:Disable: Disable the funct

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management110ENbit SERVICE TYPE field that specifies how the datagram should b

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management111EN쐇 enable both VIP and DSCPChoose priorities of VIP and DSCP.쐋 e

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management112EN왏 Weight (1~55): Over here, you can make an arrangement to Weig

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management113EN쮿 Function name: 802.1p Setting쮿 Function Description: This fun

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management114EN쮿 Parameter Description: 왏 TOS Delay Priority Mapping: Eac

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management115EN쮿 Parameter Description:왏 TOS Throughput Priority Mapping: Each

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management116EN쮿 Parameter Description:왏 TOS Reliability Priority Mapping: Eac

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management117EN쮿 Parameter Description:왏 TOS Monetary Cost Priority Mapping: E

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management118EN쮿 Parameter Description:왏 DSCP Priority Mapping: 64 kinds of pr

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 1: Introduction11ENactions. TACACS+ is an alternative to other AAA protocols such asRADIUS. 쮿 IGMP Snoopi

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management119EN4.20.2 Loopback쮿 Function name: Loopback Test쮿 Function Descrip

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management120EN4.20.3 Ping쮿 Function name: Ping Test쮿 Function Description: Pi

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management121EN왏 Time Gap:To support the time gap for ping test.왏 HostTo suppo

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management122EN쮿 Parameter Description: Specify the IP address where the TFTP

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management123EN왏 Events:Display the trap event name. 왏 Auto Upload Enable: Swi

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management124EN왏 Path and Filename: File path and filename stored the image f

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management125EN4.25 LogoutYou can manually logout by performing Logout functio

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management126EN5 Operation of CLI Management5.1 CLI ManagementRefer to Chapter 2 for

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management127ENFig. 4-1Fig. 4-25.2 Commands of CLIFig. 4-3

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management128EN5.2.1 Global Commands of CLI쮿 end왏 Syntax:end왏 Description:Back to the

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 1: Introduction12EN1.2 Just what can your LANCOM switch do?LANCOM ES-2126+LANCOM ES-2126PHardware Support

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management129ENPSES-2126C(trunk)# exitPSES-2126C#쮿 help왏 Syntax:help왏 Description:To

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management130EN logout Logout the system save start Save as

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management131EN 9. events 10. end 11. ip 12. help 13. historyPSES-2126C(ip)# history

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management132ENchoose N or n, the IP address will keep the same one that you had save

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management133ENRestoring ...Restore User Configuration SuccessfullyPress any key to r

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management134ENSaving user...Save SuccessfullyPSES-2126C#5.2.2 Local Commands of CLIP

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management135EN1:set 802.1x to Multi-host mode왏 Possible value:<port range> : 1

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management136EN<port range> : 1 to 26<sec> : 0-65535, default is 60왏 Exam

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management137EN왏 Example:PSES-2126C(802.1x)# set reAuthMax 2 2쮿 set reAuthPeriod왏 Syn

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management138EN쮿 set state왏 Syntax:set state <ip> <port-number> <secre

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 1: Introduction13EN5 kinds of QoS, are as follows, MAC Priority, 802.1p Priority, IP TOS Pri-ority, and D

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management139EN쮿 set txPeriod왏 Syntax:set txPeriod <port-range> <sec>왏 De

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management140EN 6 Disable쮿 show parameter왏 Syntax:show parameter왏 Description:

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management141ENPSES-2126C(802.1x)# show security Port Mode Status======

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management142EN<name> : new account name왏 Possible value:<name> : A strin

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management143ENCurrent username (aaaaa):bbbbbNew password:Confirm password:Username c

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management144EN<#>: 1 to 6왏 Example:PSES-2126C(alarm-email)# del mail-address 2

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management145EN왏 Argument:<ip>:email server ip address or domain name왏 Possible

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management146ENEmail Address 2:Email Address 3:Email Address 4:Email Address 5:Email

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management147ENTo disable the sms of the events.왏 Argument:<range>:del the rang

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management148EN왏 Description:To enable the email of the events.왏 Argument:<range&g

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 2: Installation14EN2 InstallationThis chapter will assist you to quickly install hardware and software. F

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management149ENshow왏 Description:The Show here is used to display the configuration o

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management150EN20 Module Removed21 Moudle Media Swapped22 PoE Failure 쮿 show (alarm)왏

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management151EN왏 Description:To delete sms server, user account and password.왏 Argume

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management152EN쮿 set user왏 Syntax:set user <username>왏 Description:To set up us

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management153ENautologout쮿 autologout왏 Syntax:autologout <time>왏 Description: T

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management154ENset ingress-rate <range> <data_rate>왏 Description: To set

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management155EN왏 Description: To display all current settings of the bandwidth.왏 Argu

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management156EN왏 Argument:None.왏 Possible value:None.왏 Example:PSES-2126C(config-file

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management157ENTo run the import user-conf function.왏 Argument:None.왏 Possible value:

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management158EN왏 Argument:None.왏 Possible value:None.왏 Example:PSES-2126C(config-file

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 2: Installation15EN2.3 Status displays and interfacesMeanings of the LEDsThe following section describes

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management159ENSecond : 30PSES-2126C(dhcp-boot)#diag쮿 diag왏 Syntax:diag왏 Descri

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management160ENExternal Loopback Test : Port 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management161EN왏 Argument:None.왏 Possible value:None.왏 Example:PSES-2126C(firmware)#

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management162EN쮿 enable왏 Syntax:enable왏 Description: To enable the gvrp function.왏 Ar

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management163ENPSES-2126C(gvrp-group-2)# showGVRP group VID: 2Port Applicant Re

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management164EN5 Non-Participant Fixed6 Non-Participant Fixed7 Normal

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management165ENTo set default registrar mode for each port.왏 Argument: <range>:

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management166EN 1 20 60 1000 Normal NormalEnable

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management167EN쮿 set timer왏 Syntax:set timer <range> <join> <leave>

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management168EN---- --------- ---------- ------------- --------------- --------- ----

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 2: Installation16EN쐋 PWRPower LED: Constant green when power is supplied to the device.쐏ACTConstant green

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management169ENCounter Name Received Transmitted-------------------- ----

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management170EN왏 Argument:<name>: hostname, max. 40 characters.왏 Possible value

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management171EN왏 Possible value:<index>: the index of the allowed-group.왏 Examp

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management172ENTo display IP multicast table.왏 Argument:None.왏 Possible value:None.왏

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management173ENPSES-2126C(ip)# enable dhcp manual쮿 set dns왏 Syntax:set dns <ip>

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management174ENTo display the system’s DHCP function state, IP address, subnet mask,d

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management175EN왏 Description:To disable the auto-upload function.왏 Argument:None.왏 Po

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management176ENTftp Server : 0.0.0.0Auto Upload : Disable1) Wed Apr 13 12:13:27 2005

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management177EN왏 Possible value:<mac> : mac address 왏 Example:PSES-2126C(mac-ta

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management178EN2) 00-33-03-04-05-06 ccc<<information>>쮿 search왏 Syntax

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 2: Installation17EN쐃 CPU RUNBlinks green if the CPU is running without problem.쐇PWRPower LED: Constant gr

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management179ENNone.왏 Example:PSES-2126C(mac-table-information)# showMAC Table ListAl

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management180EN<port> : 1 to 24<num>: 0 to 8191 왏 Example:PSES-2126C(mac-

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management181EN 25 8192 26 8192<<static-mac>>쮿 add왏 Syntax:add &l

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management182EN왏 Possible value:<mac> : mac address 왏 Example:PSES-2126C(mac-ta

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management183ENPSES-2126C(management-add)# setThis command will show exhaustive opera

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management184EN[#]: a specific or range management security entry(s)왏 Possible value:

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management185EN[<vid> <value>] VLAN ID.[<ip> <va

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management186ENPSES-2126C(management)# show#: 1Name : Tom VlanID : 2

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management187ENPSES-2126C(poe)# set state 11 0쮿 show 왏 Syntax:show왏 Description:To di

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management188ENPower Management Port Off | X X X X X X X X XX X XPort No

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 2: Installation18EN쐆 FDXConstant green when the LED mode is set to "Full-Duplex".쐊SPDConstant g

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management189EN 9 Normal Enable Normal 0.0 0 0 10 Normal Enabl

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management190ENdisable state <range>왏 Description: To disable the communication

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management191ENPSES-2126C(port)# set flow-control 3-6 symmetric쮿 set speed-duplex왏 Sy

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management192EN왏 Example:PSES-2126C(port)# show conf쮿 show detail-counter왏 Syntax:sho

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management193ENVendor Name : APAC OptoVendor PN : KM28-C3S-TC-N

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management194EN왏 Example:PSES-2126C(port)# show statusPort Media Link State Auto Ne

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management195EN왏 Description: To disable 802.1p qos.왏 Argument:None.왏 Possible value:

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management196ENdisable tos왏 Description: To disable IP TOS qos.왏 Argument:None.왏 Poss

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management197EN쮿 enable qos왏 Syntax:enable qos 왏 Description: To enable qos function.

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management198ENYou don't need to use all of queue, but must assign queue in orde

LANCOM ES-2126+LANCOM ES-2126P

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 2: Installation19ENIf optical connections are to be used, additional modules can bepurchased as accessor

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management199EN<wrr|strict>: wrr or strict <wrr_0 to 3>: 1-55. 왏 Example:

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management200EN왏 Argument:<port_range>: syntax 1,5-7, available from 1 to 26<

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management201EN DiffServ Queue DiffServ Queue DiffServ QueueDiffServ Queu

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management202EN 56 3 57 3 58 359 3

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management203EN쮿 show priority-tag왏 Syntax:show priority-tag왏 Description: To show 80

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management204EN쮿 show tos왏 Syntax:show tos왏 Description: To show IP tos Qos configura

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management205EN P0 P1 P2 P3 P4 P5 P6 P7 ---- ---- ---- ----

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management206EN쮿 set왏 Syntax:set <port>왏 Description: To set up the function of

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management207ENNone.왏 Possible value:None.왏 Example:PSES-2126C(security-mirror)# disa

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management208ENPSES-2126C(security-mirror)# set 1 4 2-3쮿 show왏 Syntax:show왏 Descripti

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 2: Installation20ENIn Setup, select Install software. The following selection menus will appearon screen:

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management209EN쮿 enable 왏 Syntax:enable set-communityenable snmp왏 Description:The Ena

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management210ENPSES-2126C(snmp)# set trap 1 192.168.1.1 162 public쮿 show왏 Syntax:show

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management211ENTo force the port to transmit RST BPDUs.왏 Argument:<range>: synt

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management212EN왏 Description: To set up the parameters of STP.왏 Argument:<Bridge P

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management213EN<admin p2p>: auto / true / false왏 Example:PSES-2126C(stp)# set p

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management214EN쮿 show port왏 Syntax:show port왏 Description: To display the port inform

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management215EN 25 DISCARDING 20000 128 NoAuto 26 DISCARDING 2

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management216ENset contact <contact> 왏 Description: To set the contact descrip

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management217EN쮿 show왏 Syntax:show왏 Description: To display the basic information of

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management218ENshow access왏 Description: Shows the access configuration.왏 Example:ES-

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch21EN3 Configuring and monitoring the LANCOM switch3.1 Conf

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management219ENEnables the TACACS+ functions for accounting, authorization and fallba

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management220EN쮿 set host왏 Syntax:set host <#> <ip>왏 Description: Sets th

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management221ENvalue even on the secondary TACACS+ server, the secondary login method

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management222EN왏 Example:ES-2126+(tac-plus)# set web-access 1 0Sets the primary acce

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management223ENset daylightsaving <hr> <MM/DD/HH> <mm/dd/hh>왏 Descr

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management224EN<YYYY>: (2000-2036) <MM> : (01-12)<DD>

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management225ENCurrent Time : Wed Apr 21 06:16:22 2005NTP Server

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management226EN왏 Example:PSES-2126C(trunk)# set hash 2쮿 set priority왏 Syntax:set prio

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management227EN<group>: 1-3.<active LACP>: active or passive 왏 Example:PS

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management228EN왏 Argument:None.왏 Possible value:None.왏 Example:PSES-2126C(trunk)# sho

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch22EN쮿 If you do not have the device's IP number, LANc

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management229EN------ -------- ----------------- --------------- -----------------

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management230EN 12 None 0 Active 12 --- 13 Non

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management231ENTo delete the tag-based VLAN group.왏 Argument:<vid>: VLAN ID, av

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management232ENdisable svl왏 Description:To enable Independent VLAN Learning.왏 Argumen

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management233EN쮿 enable drop-untag왏 Syntax:enable drop-untag <port_range>왏 Desc

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management234EN왏 Example:PSES-2126C(VLAN)# enable symmetric쮿 set mode왏 Syntax:set mod

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management235EN왏 Argument:<port_range>: which port(s) you want to set PVID(s).

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management236ENshow config왏 Description:To display the current VLAN mode, Symmetric V

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management237EN VID :1 Member:1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1819

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management238EN 9 1 0 Disable 10 1 0 Disable

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch23EN3.1.2 Starting the Command Line Interface over the net

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management239EN쮿 enable왏 Syntax:enable왏 Description:To enable the virtual stack.왏 Arg

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 5: Operation of CLI Management240ENPSES-2126C(vs)# set role master쮿 show왏 Syntax:show왏 Description:To dis

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 6: Appendix241EN6 Appendix6.1 Performance data and specifications LANCOM ES-2126+ LANCOM ES-2126PPerfor

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 6: Appendix242ENCE CE conformity according to EN 55022, EN 55024, EN 60950Environment Temperature range 0

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 6: Appendix243EN6.2 Connector wiring6.2.1 Ethernet interface 10/100Base-TX8-pin RJ45 sockets (ISO 8877, E

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch24EN쐋 Log on with user name and password (default: admin,

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch25ENThis is the default configuration and it cannot be alt

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch26ENHere you can save the current configuration to the fla

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch27EN왏 Export file path:Export start: You can export the st

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch28EN왏 Gray: The port is deactivated in the configuration왏

© 2009 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved.While the information in this manual has been compiled with great care, it may no

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 3: Configuring and monitoring the LANCOM switch29ENSource Equipment (PSE) measures the power requirement

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management30EN4 Operation of Web-based ManagementThis chapter instructs you ho

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management31ENtrator’s identity, can only monitor the system. There are only a

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management32ENinformation of a single port. When clicking the port on the fron

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management33EN4.2 System4.2.1 System Information쮿 Function name: System Infor

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management34EN왏 System Description: As it is, this tells what this device is.

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management35EN쮿 Function name: IP Configuration쮿 Function Description: Set IP

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management36ENnetworks, hence, subnet mask is introduced to solve this problem

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management37EN1305, has been adopted on the system is version 3 protocol. The

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management38ENtime since it passed over. And when the time passes over the end

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Preface3ENPrefaceThank you for your confidence in us!The LANCOM switch models LANCOM ES-2126+ and LANCOM ES-2126P

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management39ENHour:Range is 0 ~ 23.Default: 04.2.4 Account ConfigurationIn thi

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management40EN쮿 Password: guest4.2.5 Management SecurityThrough the managemen

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management41EN쐏 When both “accept and deny” lists exist, then it will deny all

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management42EN쮿 Parameter Description:왏 Name: A name is composed of any letter

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management43ENwhile you select “Accept” action, you will have the authority to

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management44ENconfigure more than two devices as Master device, however, the M

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management45EN왏 No:Display the order number that the trap happened.Time: Displ

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management46EN쮿 Function Description: It is used to set each port’s operation

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management47EN4.3.2 Port StatusThe function Port Status gathers the informatio

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management48EN왏 State: Show that the communication function of the port is “En

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Preface4ENmanual, or if you require any further support. The area 'Support' willhelp you with many answ

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management49ENDefault: None.쮿 Parameter description of Port 25 and Port 26:왏 C

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management50EN왏 Mon1(Bias) mA: Show the Bias current of module.왏 Mon2(TX PWR):

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management51EN4.3.4 Detail CounterThe function of Detail Counter collects any

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management52EN왏 Rx Multicast Packets: Show the counting number of the received

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management53EN왏 Tx Pause Packets: Show the counting number of the transmitted

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management54EN왏 Port No: Port number.왏 Port On: Shows whether the port is supp

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management55ENonce the power required by the PD excesses the Class, Short Circ

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management56EN왏 Class: The Class of the PD linked to the port of the switch.4.

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management57ENBasically, it is passive except issuing the trap information. Th

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management58ENDefault trap host IP address: 0.0.0.0Default port number :162왏 T

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Contents5ENContents1 Introduction 91.1 Key Features in the Device 101.2 Just what can your LANCOM switch do? 1

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management59ENpower and then reboot and recover. At this moment, a bunch of sw

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management60ENThe packets will be discarded by the IGMP Snooping if the user t

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management61EN왏 VLAN ID: Shows VLAN ID for each multicast group.왏 Member Port:

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management62EN왏 Edit: The existed entry also can be modified after pressing &l

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management63EN1&2&3&4. If you are on the port 1, you can communica

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management64EN4.9.2 Tag-based Group 쮿 Function name: Tag-based Group Configura

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management65ENwill be untagged. Finally, press the <Apply> button to hav

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management66EN4.9.3 PVID쮿 Function name: PVID쮿 Function Description: In PVID S

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management67ENIf the former is the case, then the packets with tagged or untag

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management68EN 왏 Delete Group: Just press the <Delete> button to remove

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Contents6EN4 Operation of Web-based Management 304.1 Web Management Home Overview 314.1.1 The Information of P

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management69EN쮿 Parameter Description:왏 Port: Select the port you would like t

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management70EN왏 Aging Time: Delete a MAC address idling for a period of time f

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management71EN쮿 Parameter Description:왏 MAC: It is a six-byte long Ethernet ha

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management72EN쮿 Function name: MAC Alias Create/Edit or Delete쮿 Function Descr

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management73ENIn GVRP Configuration function folder, there are three functions

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management74EN왏 Default Applicant Mode: The mode here means the type of partic

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management75EN쮿 Function Description: All GVRP counters are mainly divided int

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management76EN왏 Transmitted:Total GVRP Packets: Total GARP BPDU is transmitted

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management77EN4.12 STP ConfigurationThe Spanning Tree Protocol (STP) is a stan

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management78EN왏 Current Max. Age: Show the current root bridge maximum age tim

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Contents7EN4.15.2 Configuring the TACACS+ parameters 984.16 Alarm Configuration 1024.16.1 Events 1024.16.2 E-

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management79EN4.12.2 STP ConfigurationThe STP, Spanning Tree Protocol, actuall

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management80ENfrom Learning state moved to Forwarding state of a port in bridg

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management81EN왏 Port Status: It displays the current state of a port. We canno

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management82ENEdge Ports will immediately transit to forwarding state and skip

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management83ENration is to make the port quickly get back to act as an RSTP po

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management84ENThe switch LACP does not support the followings:Link Aggregation

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management85EN쮿 Parameter Description:왏 Method: This determines the method a p

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management86EN쮿 Function name: Aggregator View쮿 Function Description: To displ

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management87EN쮿 Function name: LACP Detail (LACP Aggregator Detailed Informati

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management88ENDefault: DA and SA. 4.14 802.1x Configuration802.1x port-based n

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Contents8EN

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management89ENA port acting as an authenticator is thought to be two logical p

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management90ENSupplicant PAE. In this case, PC A wants to access the services

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management91EN쐄 And next, the Supplicant replies an EAP-Response/Identity to t

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management92ENOnly MultiHost 802.1X is the type of authentication supported in

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management93EN쮿 Function Description: This function is used to configure the g

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management94EN왏 802.1x Mode: 802.1x operation mode. There are two options, inc

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management95ENof 802.1X authenticator. The Port Status will show the following

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management96ENPeriod, reAuthEnabled, reAuthPeriod, max. Request, suppTimeout,s

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management97EN왏 suppTimeout(1-65535 s): A timeout condition in the exchange be

LANCOM ES-2126+ und LANCOM ES-2126P쮿 Chapter 4: Operation of Web- based Management98ENconsistent on all devices or for all services. For this reason,